MUROBOND Pure Satin is a high quality water based enamel paint. It currently has about 37.96 gms/L VOC's - which is much lower in VOC's than oil based enamels and thus more preferable when wishing to reduce VOC's in your home and in our environment. It can be used both interior and exterior.
Using modern low VOC paints for homes and commercial premises ensures healthy air quality indoors, and avoids air pollution outdoors. Made in Australia by environmentally minded company MUROBOND their Pure range of paints are sustainable products for people and the planet. Commercially they confer higher value and green star ratings to buildings they are used on.
Suitable: for interior and exterior walls and trim in domestic and commercial situations. Adds a satin lustre and extra hard wearing qualities to surfaces it is used on. Especially suited to children's rooms, kitchens, bedrooms, restaurants, schools, hospitals and public places where air quality is important and frequent cleaning is required. Will confer Green star ratings on a building when used interior and exterior.
Appearance: is a satin (semi gloss) high quality finish.
We can also tint to other paint company colours as a special request EG Dulux, Taubmans, Resene etc.
We tint using zero VOC tints so that no VOC's are added when tinting.
Odour: is very low when applying. No odour when dry. Sleep in the room the same day you paint.
VOC: VOC is 37.96 gms/L
Durability: is excellent. Stain resistant and scrubbable. It also contains a non-toxic mould inhibitor.
Vapour Permeability: is good but not as breathable as a flat or low sheen paint. It seals in old paint to a degree while still allowing some breathability to the wall.
Priming: is recommended on new Gyprock, timber, and other bare surfaces.
Use MUROBOND Primer
, coloured towards the topcoat colour if necessary. See the Technical Data Sheet for correct priming and preparation for different substrates.
Application: is by roller or brush. Use a short nap (6-8ml) synthetic roller and apply in temperatures between 10 - 35 degree C
Drying: is overnight between coats.
Coverage: is approximately 12 sq.m/L.
Coats: 2 coats recommended.