MUROBOND Primer is a high quality acrylic primer, sealer, and undercoat, all in one. Exceptionally versatile on a wide range of surface, and specifically designed for use with Murobond's range of finishes.
Suitable: for interior and exterior use on bare gyprock, timber, fibro cement, masonry, painted surfaces, gloss enamels (with a light sand), and vinyl, aluminium, ceramic tiles and laminates (with a good sand). See Technical Data Sheet below for specific preparation of these last surfaces.
Appearance: is low sheen
white, or can be tinted to grey or half strength of topcoat colours. Tinting is recommended when using under MUROBOND Murowash
, Bridge Paint
or Aqua Glaze Pearl
paints. Specify the colour of your topcoat and we will tint to a base colour to suit this - usually about half strength of your topcoat colour.
Odour: is mild.
VOC: is medium. About 30 gms /L
Durability: is excellent. Good longevity for indoor and outdoor situations
Vapour Permeability: is good. Allows the substrate to breathe.
Application: is by roller, brush or spray gun as for conventional paint.
Drying: is 2 to 4 hours before top coating.
Coverage: is 8 -10 sq.m /L depending on the porosity of the surface.
Coats: is usually one. Highly porous surfaces may give best results with two coats.