ROCKCOTE Venetian Plaster

$288.00
Article number: P-3100
Availability: In stock

ROCKCOTE Venetian Plaster delivers a reflective highly polished finish. A unique way to highlight feature walls, columns or ceilings.

Suitable: for interior features in domestic and commercial buildings including retail spaces. Especially suited to columns and feature walls that are designed to stand out. Can be used for feature walls in bathrooms but not in shower recesses or splashbacks. 
Appearance: is a highly polished plaster , or marble like finish. 
Sheen: glass shine
Colours: soft off white but can be tinted to a variety of colours using liquid tints
VOC: is zero.
Durability: lime forms a hard long lasting surface, but all decorative finishes require care to maintain them.
Water resistance: excellent
Application: is with a stainless steel trowel in two very thin layers 0.5mm each, polished at the appropriate stage in the drying cycle. Apply in temperatures above 5'C and below 35'C.
ROCKCOTE recommends Venetian Plaster is applied only by highly skilled and licensed tradespeople with extensive experience in these products. It is the responsibility of the applicator to understand the application method and procedure involved for each substrate, in order to obtain a satisfactory outcome.
Preparation: the substrate needs to be sound, clean and installed according to the building code so there is no movement of the substrate. Any base coats should be fully cured. ROCKOTE Natural Materials Systems Guide outlines the correct priming and procedure for different substrates. ROCKCOTE will also prepare a custom specification for each project if requested.
Drying: is 12 hours between coats.
Coats: is usually two but more may be applied.
Coverage: is approximately 60sq.m/15L 
Technical Data Sheets: See full Technical Data Sheet and SDS Also ROCKOTE Natural Materials Systems Guide 

0 stars based on 0 reviews