MUROBOND Murothane

$50.00
Article number: P-2159
Availability: In stock

MUROBOND Murothane is a low VOC hard wearing, semi-gloss, clear finish with exceptional trafficability, minimal yellowing, and easy recoating.

Suitable: for use on all interior timbers - shelving, panelling, furniture, counters, trim, doors, and floors. Also use to provide a hardwearing seal over concrete floors, painted floors, furniture & trim.
Appearance: a clear semi gloss finish. Excellent colour tone on soft and hardwoods.
Colours: clear only
Odour: is low
VOC: is low for a floor finish. 69g/L (Most water based polyurethanes are at least 110g/L) 
Durability: is great.
Priming:  MUROBOND Clear Acrylic Sealer should be used as the first coat on concrete or alkaline (lime) painted surfaces, and can be used as an economical priming coat on pine plywood to avoid any potential yellowing as it ages.
Application: is with a brush, roller or paint pad in temperatures between 10 - 35 degree C. Lightly sand between coats as necessary.
Drying: is 3 hours between coats. Allow overnight drying before light traffic and 3 days before normal foot traffic. Full cure after 7 days.
Coverage: is approximately 14 sq.m/L. First coat on highly absorbent timbers or concrete may be down to 11sq.m/L
Coats: is two for timber trim and over painted surfaces, three for floors and benchtops.
Technical Data Sheets: See full Technical Data Sheet, Slip Test and SDS

0 stars based on 0 reviews