LANOTEC Timber Seal Plus is a heavy duty, penetrating, lanolin product for rough sawn timbers such as bridges, piers, wharves and walkways. It repels moisture but allows the timber to grey naturally, whilst also offering good slip reduction and preventing the corrosion of fastenings. Only available as 20L size.
Suitable: for rough sawn timber in boardwalks, bridges and jetties.
Appearance: is a clear liquid that penetrates into the timber and leaves a slightly deeper and waxed appearance to the timber. It can be polished when dry to bring a sheen to the surface. If the timber is exposed to sun the timber will grey naturally with age.
Odour: is mild.
VOC: not available. Caution should be exercised when applying it as the carrier is a volatile solvent which, although classed as non-toxic, could be irritating to sensitive individuals.
Durability: is good. It preserves the timber by repelling moisture and stopping it from drying out and rotting. Re-apply annually in full exposure to maintain this protection.
Application: is with a brush, or lambswool applicator, spreading the product sparingly and evenly. See full Application Instructions for Timber Seal & Timber Seal Plus and Application video
Drying: is a minimum of 6 hours between coats however this can vary a lot depending on the condition of the timber and the weather so it is best to 'listen' to the timber and apply a second coat if and when it will be absorbed.
Coverage: between 8 - 15 sq.m/L depending on how dry the timber is.
Coats: is usually two thin coats but may be more or less depending on the dryness of the timber. Allow the timber to show you how much it will absorb. If the final coat remains a bit tacky it can be buffed to remove any residue.
Technical Data Sheets: See full Technical Data Sheet and SDS.