GIORGIO GRAESAN Marmorino Spirito Libero
GIORGIO GRAESAN Marmorino Spirito Libero is an economical fine grained lime plaster with a smooth matt finish. It can be waxed and polished to a beautiful sheen or further decorated with metallic gazes and waxes to create striking feature walls.
Suitable: for interior walls, feature walls, and areas of high humidity such as bathrooms and laundries. Has a dry film build of 1-1.5mm. Not suitable for exterior walls or shower recess.
Appearance: is smooth, matt or waxed lustre. Metallic waxes and glazes can be overlaid on the surface to create striking feature walls.
Odour: is nil
Colour: the natural colour is white. Marmorino Spirito Libero is tinted to a large range of colours with liquid tints. The Spirito Libero Catalogue contains a colour chart to view these colours in your home. These can be purchased and returned for a full refund when you have finished using them.
Durability: naturally resistant to mould and bacteria. Good abrasion resistance.
Vapour Permeability: yes, good.
Application: is with a Stainless Steel trowel Two thin coats (0.6mm each) with aprox 24 hrs drying time between them. Tint should be mixed into the product and left to rest for a minimum of 12 hours before using the product. Apply in temperatures above 5'C and below 35'C.
GIORGIO GRAESAN recommends that all of their lime plasters are applied only by highly skilled and licensed tradespeople with extensive experience in these products. It is the responsibility of the applicator to understand the application method and the procedure involved, in order to obtain a satisfactory outcome.
Preparation: the substrate needs to be sound, clean and installed according to the building code so there is no movement of the substrate. All base coats must be fully cured. Primus Naturale is applied as a priming coat to get the correct absorption properties in the substrate. See GIORGIO GRAESAN Specifications and System Guide for correct preparation of various substrates.
Coats: 2 coats
Drying Time: 24hrs before applying second coat (but not longer than 48hrs). Allow final coat to dry at least 48hrs before waxing or glazing.
Technical Data: See full Technical Data Sheet and SDS